Manual Hydraulic Universal Operating Table » OT-600 / OT-600A

This operating table is designed to offer various position of any part of body, it can be used for general surgery such as, Gynecological position, Urologic position, Proctologic position, Thyroidectomy position Gall / Baladder position, Trendelenburg position, Reverse Trendelenburg position, Flex / Reflex position, Extension position, Full chair position, etc…..

Control the movement of table top toward left / right and ascent / descent of back and seat section with two rotating cranks under the position of headrest.

The mattress on the table top, may easily to cleaned and no blood spot will be remained.

The table base covered stainless steel plate equipped with a brake facilities controlled by foot pedal as well to stop or free the table to move and there are four castors.

This operating table can match every optional accessories suitable for any occasion during operation. Most of the accessories are contructed by stainless steel.


    » Turn clockwise-Table will tilt to left
    » Turn anti-clockwise-Table will tilt right


    » Push in and turn clockwise-Seatrest will move downwards
    » Push in and turn anti-clockwise-Seatrest will elevate
    » Pull out and turn clockwise-Backrest will elevate
    » Pull out and turn anti-clockwise-Backrest will move downwards
» Length of table top ... 195 CM

» Width of table top ... 55 CM

» Table top height lowest/heighest ... 73 CM-103 CM
    (without mattress)

» Lateral tilt left/right ... 20° / 20°

» Trendelenburg/Reverse trendelenburg ... 30° / 30°

» Back section up/down tilt angle ... 40° / 25°

» Seat section up/down tilt angle ... 35° / 25°

» Leg section up/down/split tilt angle ... 0° / 90° / 180°

» Head section up/down tilt angle ... 25° / 90°

» Weight ... Approx 170 kgs
© 2010-2013 All rights reserved